[1]姚洋,Балденко Ф. Д..基于齿条啮合的螺杆钻具定转子造型设计理论[J].石油机械,2020,48(01):26-32.[doi:10.16082/j.cnki.issn.1001-4578.2020.01.004]
 Yao Yang,. ..Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle[J].China Petroleum Machinery,2020,48(01):26-32.[doi:10.16082/j.cnki.issn.1001-4578.2020.01.004]
点击复制

基于齿条啮合的螺杆钻具定转子造型设计理论

参考文献/References:

[1] 路玥. 螺杆马达转子的线型分析[D]. 西安:西安石油大学, 2010.LU Y. Profile analysis of screw motor’s rotor[D]. Xi’an:Xi’an Shiyou University, 2010.
[2] 王可, 陈亮亮, 孙兴伟. 多头等壁厚橡胶螺杆钻具定子有限元分析[J]. 装备制造技术, 2010(1):83-85.WANG K, CHEN L L, SUN X W. FEA of stator of the equal wall thickness of the multiple screw drilling tool[J]. Equipment Manufacturing Technology, 2010(1):83-85.
[3] 迟博. 螺杆马达定子衬套热力耦合数值分析研究[D]. 成都:西南石油大学, 2015.CHI B. Numerical analysis of thermal coupling of stator bushing of screw motor[D]. Chengdu:Southwest Petroleum University, 2015.
[4] 刘思瀛. 7LZ172金属螺杆马达研制[D]. 西安:西安石油大学, 2016.LIU S Y. Development of metal screw motor 7LZ172[D]. Xi’an:Xi’an shiyou University, 2010.
[5] 祝效华, 王鹏飞, 石昌帅. 基于热老化实验的螺杆马达定子橡胶本构模型研究[J]. 计算力学学报, 2017, 34(4):459-465.ZHU X H, WANG P F, SHI C S. Study on the constitutive model of the screw motor’s stator rubber based on thermal aging experiment[J]. Chinese Journal of Computational Mechanics, 2017, 34(4):459-465.
[6] NGUYEN T, AL-SAFRAN E, SAASEN A, et al. Modeling the design and performance of progressing cavity pump using 3-D vector approach[J]. Journal of Petroleum Science and Engineering, 2014, 122:180-186.
[7] NGUYEN T C, AL-SAFRAN E, NGUYEN V. Theoretical modeling of positive displacement motors performance[J]. Journal of Petroleum Science and Engineering, 2018, 166:188-197.
[8] Балденко Д Ф, Балденко Ф Д. EXиклоидальное заexепление в нефтепромысловой технике:традиexионные и новые области применения[J]. Строительство нефтяных и газовых скважин на суше и на море, 2010(10):2-6.BALDENKO D F, BALDENKO F D. Cycloidal gearing in oilfield technology:traditional and new applications[J]. Construction of Oil and Gas Wells on Land and Sea, 2010(10):2-6.
[9] 苏义脑. 螺杆钻具研究及应用[M]. 北京:石油工业出版社, 2001.SU Y N.Reseosrch and application of soreew drilling motor[M]. Beijing:Petroleum Industry Press, 2001.
[10] 李特文. 齿轮几何学与应用理论[M]. 上海:上海科学技术出版社, 2008.LI T W. Gear geometry and application theory[M]. Shanghai:Shanghai Science and Technology Press, 2008.
[11] 吴序堂. 齿轮啮合原理[M]. 北京:机械工业出版社,1982.WU X T. Gear meshing principle[M]. Beijing:China Machine Press, 1982.
[12] 宋玉杰. 单螺杆泵螺杆:衬套副型线研究[D]. 大庆:大庆石油学院, 2008.SONG Y J. Research on the line style of shaft-housing pairs of progressing cavity pump[D]. Daqing:Daqing Petroleum Institute, 2008.
[13] 徐学忠. 内啮合摆线齿轮泵的理论研究与仿真[D]. 南京:东南大学, 2005.XU X Z. Study on the theory and simulation of cycloidal pump[D]. Nanjing:Southeast University, 2005.
[14] 黄将兴, 李朝阳, 陈兵奎. 二次包络摆线内啮合齿轮泵研究[J]. 机床与液压, 2010, 38(19):7-10.HUANG J X, LI C Y, CHEN B K. Research on double enveloping cycloid internal gear pump[J].Machine Tool & Hydraulics, 2010, 38(19):7-10.
[15] 王振, 刘忠明. 内啮合摆线齿轮泵摆线轮齿廓参数化设计分析[J]. 机械传动, 2010, 34(2):35-37.WANG Z, LIU Z M. Parameterized design analysis of cycloid gear profile of internal cycloidal gear pump[J]. Mechanical Transmission, 2010, 34(2):35-37.
[16] 牛鸿斌. 内啮合齿轮式压缩机设计与性能分析[D]. 太原:中北大学, 2014.NIU H B. Design and performance analysis of internal geared compressor[D]. Taiyuan:North University of China, 2014.

相似文献/References:

[1]童华,祝效华,石昌帅.螺杆钻具推力轴承工作力学分析及结构改进[J].石油机械,2010,(04):34.
[2]李增亮,陈猛.阶梯形螺杆衬套副的设计及有限元分析[J].石油机械,2011,(01):28.
[3]李萌,于兴胜,罗西超,等.螺杆钻具的前沿技术[J].石油机械,2011,(09):19.
[4]陈世春,练章华,王树超,等.螺杆钻具打捞器特锥扣接头有限元分析[J].石油机械,2011,(09):27.
[5]祝效华,石昌帅,童华.等壁厚螺杆钻具定子衬套变形规律研究[J].石油机械,2011,(12):5.
[6]张国伟,史桂云,刘广良.5LZ172-Ⅲ型长寿命螺杆钻具的研制[J].石油机械,2012,(04):30.
[7]陈冬,李志广,李川,等.井口钻塞加压装置的研究与应用[J].石油机械,2012,(04):40.
[8]张强,陈治,张鹏飞,等. 等壁厚螺杆钻具旁通阀水力循环试验与CFD分析[J].石油机械,2015,43(05):13.
 [J].China Petroleum Machinery,2015,43(01):13.
[9]胡贵,李令东,刘新云,等.扎哈泉致密油水平井钻井技术对策[J].石油机械,2016,44(02):23.[doi:10.16082/j.cnki.issn.1001-4578.2016.02.005]
 Hu Gui,Li Lingdong,Liu Xinyun,et al.Horizontal Well Drilling Technique for Zahaquan Tight Oil[J].China Petroleum Machinery,2016,44(01):23.[doi:10.16082/j.cnki.issn.1001-4578.2016.02.005]
[10]马广军,张海平,王甲昌.基于螺杆钻具的旋冲钻井装置设计及试验研究[J].石油机械,2016,44(06):24.[doi:10.16082/j.cnki.issn.1001-4578.2016.06.005]
 Ma Guangjun,Zhang Haiping,Wang Jiachang.Designed and Testing of the Positive Displacement Motor Driven Rotary Percussion Drilling Device[J].China Petroleum Machinery,2016,44(01):24.[doi:10.16082/j.cnki.issn.1001-4578.2016.06.005]

备注/Memo

收稿日期:2019-07-17。
作者简介:姚洋,生于1990年,现为在读博士研究生,研究方向为螺杆钻具定转子设计与优化。地址:俄罗斯莫斯科市。E-mail:yaoyang@gubkin.ru。

更新日期/Last Update: 1900-01-01
乐盈彩票平台 优优彩票注册 盛通彩票注册 优优彩票官网 乐盈彩票注册 盛通彩票app 亚洲彩票官网 乐盈彩票 乐盈彩票APP 乐盈彩票注册