[1]李倩,李娇娇,翟奋楼,等。水下应急封井装置内部冲蚀磨损数值模拟[J]。石油机械,2020,48(01):64-69,76。[doi:10。16082/j。cnki。issn。1001-4578。2020。01。010]
 Li Qian,Li Jiaojiao,Zhai Fenlou,et al。Numerical Simulation on the Erosive Wear inside the Subsea Capping Stack[J]。China Petroleum Machinery,2020,48(01):64-69,76。[doi:10。16082/j。cnki。issn。1001-4578。2020。01。010]
点击复制

水下应急封井装置内部冲蚀磨损数值模拟

参考文献/References:

[1] 苏尚文, 屈志明, 侯国庆, 等. 水下应急封井装置技术研究进展与建议[J]. 石油矿场机械, 2014, 43(4):96-101. SU S W, QU Z M, HOU G Q, et al. Technological research development and suggestion on subsea capping stack[J]. Oil Field Equipment, 2014, 43(4):96-101.
[2] 董星亮. 深水钻井重大事故防控技术研究进展与展望[J]. 中国海上油气, 2018,30(2):112-119. DONG X L. Research progress and prospect for serious accident prevention and control technology of deep water drilling[J]. China Offshore Oil and Gas, 2018, 30(2):112-119.
[3] MORSI S A, ALEXANDER A J. An investigation of particle trajectories in two-phase flow systems[J]. Journal of Fluid Mechanics, 1972, 55(2):193-208.
[4] 吴欢欢. 输油压力管道典型部位的冲蚀模拟研究[D]. 杭州:中国计量学院, 2014. WU H H. Numerical simulation of erosion on the typical parts of oil pressure pipeline[D]. Hangzhou:China Jiliang University, 2014.
[5] FINNIE I, MCFADDEN D H. On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence[J]. Wear, 1977, 48(1):181-190.
[6] OKA Y I, OKAMURA K, YOSHIDA T. Practical estimation of erosion damage caused by solid particle impact part 1:effects of impact parameters on a predictive equation[J]. Wear, 2005,259(1):95-101.
[7] OKA Y I, YOSHIDA T. Practical estimation of erosion damage caused by solid particle impact:part 2:mechanical properties of materials directly associated with erosion damage[J]. Wear, 2005,259(1):102-109.
[8] MCLAURY B S. Predicting solid particle erosion resulting from turbulent fluctuations in oilfield geometries[D]. Tulsa:University of Tulsa, 1996.
[9] ARABNEJAD H, MANSOURI A, SHIRAZI S A, et al. Development of mechanistic erosion equation for solid particles[J]. Wear, 2015,332/333:1044-1050.
[10] DARIHAKI F, HAJIDAVALLOO E, GHASEMZADEH A, et al. Erosion prediction for slurry flow in choke geometry[J]. Wear, 2017,372/373:42-53.
[11] FORDER A, THEW M, HARRISON D. A numerical investigation of solid particle erosion experienced within oilfield control valves[J]. Wear, 1998,216(2):184-193.
[12] 何兴建, 李翔, 李军. T型弯头不同工况的冲蚀磨损数值模拟研究[J]. 化工设备与管道, 2015, 52(3):69-72. HE X J, LI X, LI J. Numerical simulation of erosion and abrasion in T bends under various conditions[J]. Process Equipment & Piping,2015, 52(3):69-72.
[13] 张孟昀, 马贵阳, 李存磊, 等. 弯管与盲通管冲蚀磨损对比分析研究[J]. 中国安全生产科学技术, 2017,13(3):76-81. ZHANG M Y, MA G Y, LI C L, et al. Comparative analysis on erosion wear of elbow pipe and blind tube[J]. Journal of Safety Science and Technology, 2017,13(3):76-81.
[14] 涂亚东,徐小兵,殷华锋,等.高压管汇冲蚀磨损规律研究[J].石油机械,2018,46(2):84-88. TU Y D,XU X B,YIN H F,et al. Analysis on erosion wear laws of high pressure manifold[J].China Petroleum Machinery,2018,46(2):84-88.
[15] 郭岩宝,周玄黎,王浩,等.几种投球滑套球座材料的冲蚀性能试验研究[J].石油机械, 2019, 47(3):53-60. GUO Y B,ZHOU X L,WANG H,et al. Experimental study on erosion behaviors of several materials of sliding sleeve ball seat[J].China Petroleum Machinery,2019, 47(3):53-60.

相似文献/References:

[1]刘萍萍,李悦钦,王亚丽,等.笼套式节流阀冲蚀磨损计算研究[J].石油机械,2011,(04):53.
[2]孙秉才,樊建春,温东,等. 高压管汇冲蚀磨损磁记忆检测试验研究[J].石油机械,2014,(06):65.
 [J].China Petroleum Machinery,2014,(01):65.
[3]张宏伟,汪爽,柴希军,等. 氮气钻井多功能四通冲蚀磨损计算与预测[J].石油机械,2014,(09):35.
 [J].China Petroleum Machinery,2014,(01):35.
[4]丁坤,李建民,杨文新,等. 压裂液对水平井滑套球座冲蚀磨损的数值模拟[J].石油机械,2014,(12):75.
 [J].China Petroleum Machinery,2014,(01):75.
[5]邢雪阳,徐依吉,杨勇,等.粒子冲击钻井钻头内流道冲蚀特性研究[J].石油机械,2015,43(11):39.[doi:10.16082/j.cnki.issn.1001-4578.2015.11.008]
 Xing Xueyang,Xu Yiji,Yang Yong,et al.Erosion Characteristics of Inner Flow Channels of the Particle Impact Drilling Bit[J].China Petroleum Machinery,2015,43(01):39.[doi:10.16082/j.cnki.issn.1001-4578.2015.11.008]
[6]张德荣,吴思梦.基于FLUENT的水力喷砂射孔器喷嘴优化设计[J].石油机械,2017,45(12):71.[doi:10.16082/j.cnki.issn.1001-4578.2017.12.015]
 Zhang Derong,Wu Simeng.Optimization Design of Nozzle of Hydraulic Sand Jet Perforator Based on FLUENT[J].China Petroleum Machinery,2017,45(01):71.[doi:10.16082/j.cnki.issn.1001-4578.2017.12.015]
[7]涂亚东,徐小兵,殷华锋,等.高压管汇冲蚀磨损规律研究[J].石油机械,2018,46(02):84.[doi:10.16082/j.cnki.issn.1001-4578.2018.02.015]
 Tu Yadong,Xu Xiaobing,Yin Huafeng,et al.Analysis on Erosion Wear Laws of High Pressure Manifold[J].China Petroleum Machinery,2018,46(01):84.[doi:10.16082/j.cnki.issn.1001-4578.2018.02.015]
[8]郭岩宝,周玄黎,王浩,等.几种投球滑套球座材料的冲蚀性能试验研究[J].石油机械,2019,47(03):53.[doi:10.160820/j.cnki.issn.1001-4578.2019.03.010]
 Guo Yanbao,Zhou Xuanli,Wang Hao,et al.Experimental Study on Erosion Behaviors of Several Materials of Sliding Sleeve Ball Seat[J].China Petroleum Machinery,2019,47(01):53.[doi:10.160820/j.cnki.issn.1001-4578.2019.03.010]
[9]顾纯巍,张崇,杨超,等.基于Orcaflex的水下应急封井装置安全入水仿真[J].石油机械,2019,47(09):70.[doi:10.16082/j.cnki.issn.1001-4578.2019.09.011]
 Gu Chunwei,Zhang Chong,Yang Chao,et al.Orcaflex-Based Simulation on Safe Entering Water of Subsea Emergency Capping Stacks[J].China Petroleum Machinery,2019,47(01):70.[doi:10.16082/j.cnki.issn.1001-4578.2019.09.011]
[10]朱高磊.基于FLUENT的旋冲工具工作元件磨损因素研究[J].石油机械,2019,47(10):27.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.005]
 Zhu Gaolei.Wear Factors Analysis of Working Elements of Rotary Impact Tool Based on FLUENT[J].China Petroleum Machinery,2019,47(01):27.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.005]

备注/Memo

收稿日期:2019-07-17。
基金项目:国家重点研发计划项目“水下应急封井装置及其配套工艺技术”(2017YF0804506);北京市科学技术研究创新团队计划项目“隧道工程地震反应高性能计算方法研究”(IG201802N)。
作者简介:李倩,女,生于1989年,2018年毕业于中国科学院过程工程研究所化学工程专业,获博士学位,现从事化工机械数值模拟研究工作。地址:(100094)北京市海淀区。E-mail:liqian@bcc.ac.cn。

更新日期/Last Update: 1900-01-01
盛通彩票官网 优优彩票网 优优彩票注册 优优彩票注册 乐盈彩票平台 乐盈彩票平台 乐盈彩票平台 优优彩票官网 优优彩票注册 乐盈彩票平台