[1]何东,宋云飞,韩帅,等.煤层气井低压非临界流下嘴流规律分析[J].石油机械,2020,48(01):85-94.[doi:10.16082/j.cnki.issn.1001-4578.2020.01.013]
 He Dong,Song Yunfei,Han Shuai,et al。Analysis of Nozzle Flow under Low Pressure Non-Critical Flow in Coalbed Methane Well[J]。China Petroleum Machinery,2020,48(01):85-94。[doi:10。16082/j。cnki。issn。1001-4578。2020。01。013]
点击复制

煤层气井低压非临界流下嘴流规律分析

参考文献/References:

[1] 薛建强,张文洪,刘艳东,等. 考虑滑脱的气液两相嘴流新模型[J].石油钻采工艺,2017,39(4):464-471.XUE J Q, ZHANG W H, LIU Y D, et al. A new model for predicting gas-liquid two-phase choke flow considering the slip[J]. Oil Drilling and Production Technology,2017,39(4):464-471.
[2] 王志彬,李颖川,王宇,等. 气井气水两相节流实验研究及模型评价[J].钻采工艺,2008,31(5):78-80.WANG Z B, LI Y C, WANG Y, et al. Two-phase choke flow experiment and models evaluation of gas well with water[J]. Drilling & Production Technology,2008,31(5):78-80.
[3] 刘莉桦,彭浩平,江国业,等. 管道特殊部位设计数值模拟研究[J].石油机械,2018,46(9):114-119.LIU L H, PENG H P, JIANG G Y, et al. Numerical simulation of special component of pipeline[J]. China Petroleum Machinery,2018,46(9):114-119.
[4] 江国业,刘兵.输油管道弯管固液两相流流动特性数值模拟[J].油气储运,2019,38(4):398-403.JIANG G Y,LIU B. Simulation on the flowing characteristics of solid-liquid two-phase flow in bends of oil pipeline[J]. Oil & Gas Storage and Transportation, 2019,38(4):398-403.
[5] 季廷伟,王树立,陈磊,等. 海底管道腐蚀缺陷处阴极保护数值模拟[J].油气储运,2019,38(1):108-114.JI T W,WANG S L.CHEN L,et al. Numerical simulation on the cathodic protection at corrosion defects of submarine pipelines[J]. Oil & Gas Storage and Transportation, 2019, 38(1):108-114.
[6] DAI X Y, WANG Z M, LIU F S, et al. Simulation of throttling effect on cavitation for nozzle internal flow[J]. Fuel, 2019, 243:277-287.
[7] 奉虎,杨永印,王艳涛,等. 低压缩扩形喷嘴空化射流数值模拟及试验研究[J].石油机械,2018,46(4):55-59.FENG H, YANG Y Y, WANG Y T, et al. Numerical simulation and experimental study on cavitation jet of low-pressure converging expanding nozzle[J]. China Petroleum Machinery, 2018,46(4):55-59.
[8] 李增亮,孙召成,张琦,等.水下混输泵入口气液两相流数值模拟与试验[J].石油机械,2018,46(1):50-55.LI Z L,SUN Z C,ZHANG Q,et al.Numerical simulation and experiment of gas-liquid two phase flow at inlet of underwater multiphase pump[J].China Petroleum Machinery,2018,46(1):50-55.
[9] ASSEF Y, KANTZAS A, ALMAO P P. Numerical modelling of cyclic CO2 injection in unconventional tight oil resources; trivial effects of heterogeneity and hysteresis in Bakken formation[J]. Fuel,2019, 236:1512-1528.
[10] 崔璐,黄少璞,康文泉,等. 射孔工况下多喷嘴水力喷射工具冲蚀研究[J].石油钻采工艺,2018, 40(5):620-625.CUI L,HUANG S P,KANG W Q,et al. Study on erosion of multi-nozzle hydraulic jet tools under perforation condition[J]. Oil Drilling & Production Technology, 2018, 40(5):620-625.
[11] 席宝滨,侯树刚,兰凯,等. 喷射钻井中风琴管空化射流提速规律分析[J]. 钻采工艺,2018,41(6):1-4.XI B B,HOU S G,LAN K,et al. Analysis on how rop increased by organ-pipe cavitating jet in jet drilling[J]. Drilling & Production Technology, 2018,41(6):1-4.
[12] 苏林,任正城,王华军,等. 神木气田产液气井节流气嘴直径优化研究[J].石油化工应用,2016,35(11):77-80.SU L, REN Z C, WANG H J,et al. Shenmu Gasfield of liquid gas well chock nozzle diameter optimization research[J].Petrochemical Industry Application, 2016,35(11):77-80.
[13] 刘新福,刘春花,綦耀光.煤层气井排采系统有杆泵运行特性分析[J].机械工程学报,2017,53(8):195-200.LIU X F, LIU C H, QI Y G. Operating performance of sucker rod pump for the pumping system in coalbed methane wells[J]. Journal of Mechanical Engineering, 2017,53(8):195-200.
[14] 周舰.产液水平气井井下节流工艺参数优化及应用[J].石油机械,2018,46(4):69-75.ZHOU J. Optimization of downhole throttling parameters of liquid-producing horizontal gas well[J]. China Petroleum Machinery, 2018,46(4):69-75.
[15] 梅杰,刘一睿.井下节流技术优化研究及在港中油田的应用[J].石油化工应用,2018,37(9):9-12.MEI J, LIU Y R. Optimization and application of downhole throttling technology in Gangzhong Oilfield[J]. Petrochemical Industry Application, 2018,37(9):9-12.
[16] 吕孟.节流槽滑阀稳态液动力研究[J].煤矿机械,2018,39(12):33-34.Lü M. Study on steady flow force of spool valve with notches[J].Coal Mine Machinery, 2018,39(12):33-34.
[17] 石善志,刘杨,于会永,等. 气液两相嘴流回归模型在自喷井采油设计中的应用:以北特鲁瓦油田为例[J].新疆石油地质,2012,33(6):754-755. SHI S Z, LIU Y, YU H Y, et al. Application of gas-liquid two phase choke flow regression model to flowing wells production design in North Troyes Oilfield[J]. Xinjiang Petroleum Geology, 2012, 33(6):754-755.
[18] 王轲,刘彪,张俊,等. 高温高压气井井筒温度场计算与分析[J].石油机械,2019,47(1):8-13.WANG K, LIU B, ZHANG J,et al. Calculation and analysis of wellbore temperature field in HTHP gas wells[J]. China Petroleum Machinery, 2019,47(1):8-13.
[19] 张圆,周海,黄建军,等. 基于FLUENT的锥形节流阀数值模拟和气穴分析[J].石油矿场机械,2016,45(3):58-61.ZHANG Y, ZHOU H, HUANG J J, et al. Numerical simulation and cavitation analysis of taper throttlingvalve based on FLUENT[J]. Oil field Equipment,2016, 45(3):58-61.
[20] 张德荣,吴思梦.基于FLUENT的水力喷砂射孔器喷嘴优化设计[J].石油机械,2017,45(12):71-77.ZHANG D R, WU S M. Optimization design of nozzle of hydraulic sand jet perforator based on FLUENT[J]. China Petroleum Machinery, 2017,45(12):71-77.
[21] 万国强,李法军,孙冰,等.基于FLUENT的液气混抽泵动态模拟与现场应用分析[J].石油机械,2017, 45(2):106-111,115.WAN G Q, LI F J, SUN B,et al.Dynamic simulation and field application analysis of liquid-gas mixed rod pump using FLUENT software[J]. China Petroleum Machinery,2017, 45(2):106-111,115.

相似文献/References:

[1]綦耀光,薛孟尧,刘新福,等.行管式水力喷射泵反循环冲煤粉装置设计[J].石油机械,2011,(02):35.
[2]刘冰,魏文强,唐勇,等. 煤层气井排煤粉环空射流泵的数值模拟[J].石油机械,2014,(03):80.
 [J].China Petroleum Machinery,2014,(01):80.
[3]刘国强,王凤清,王〓峰,等. CD区块管杆偏磨机理分析与治理措施[J].石油机械,2014,(05):96.
 [J].China Petroleum Machinery,2014,(01):96.
[4]张芬娜,陈波,李明忠,等. 煤粉颗粒在垂直井筒沉降规律试验研究[J].石油机械,2015,43(06):76.
 [J].China Petroleum Machinery,2015,43(01):76.

备注/Memo

收稿日期:2019-07-12。
基金项目:国家科技重大专项“临兴-神府地区煤系地层煤层气、致密气、页岩气合采示范工程”(2016ZX05066004-002)、“动压调节增产技术及应用”(2017ZX05064-005)、“大型油气田及煤层气开发”(2017ZX05064004-007)。
作者简介:何东,工程师,生于1980年,2011年毕业于西安石油大学油气田开发工程专业,现从事煤层气开发生产工作。地址:(048000)山西省晋城市。E-mail:hedong6@cnooc.com.cn。
通讯作者:宋云飞,E-mail:songyunfei1212@163.com。

更新日期/Last Update: 1900-01-01
亚洲彩票注册 优优彩票注册 盛通彩票登陆 乐盈彩票网 乐盈彩票 盛通彩票app 盛通彩票网 优优彩票网 盛通彩票app 乐盈彩票网