[1]王志坚,孙立柱,高志卫.油藏降压过程中套管受力与安全排液速率研究[J].石油机械,2020,48(01):110-116.[doi:10.16082/j.cnki.issn.1001-4578.2020.01.016]
 Wang Zhijian,Sun Lizhu,Gao Zhiwei.Study on the Casing Stresses and Allowable Unloading Rate during the Reservoir Depressurization[J].China Petroleum Machinery,2020,48(01):110-116.[doi:10.16082/j.cnki.issn.1001-4578.2020.01.016]
点击复制

油藏降压过程中套管受力与安全排液速率研究

参考文献/References:

[1] 杨智刚, 张宸恺, 刘旺东, 等. 水驱油田影响采油速度的因素[J]. 新疆石油地质, 2015, 36(5):588-591.YANG Z G, ZHANG C K, LIU W D, et al. Influencing factors of oil production rate for waterflooding oilfields[J]. Xinjiang Petroleum Geology, 2015, 36(5):588-591.
[2] 黄安琪, 陈民锋, 山珊, 等. 海上油田水驱开发后期合理采油速度研究[J]. 复杂油气藏, 2017(4):51-55, 59.HUANG A Q, CHEN M F, SHAN S, et al. Study on reasonable rate of oil production in later stage of waterflooding development in offshore oilfield[J]. Complex Hydrocarbon Reservoirs, 2017(4):51-55,59.
[3] 窦蓬, 许杰, 谢涛, 等. 稠油热采安全侧钻距离数值模拟研究[J]. 石油机械, 2018, 46(11):16-22.DOU P, XU J, XIE T, et al. Numerical simulation study on safe sidetracking distance of heavy oil thermal recovery well[J]. China Petroleum Machinery, 2018, 46(11):16-22.
[4] 杨康敏, 杨冰, 高俊山, 等. 稠油热采井封采一体上返调层工艺管柱研究[J]. 石油机械, 2015, 43(6):96-98.YANG K M, YANG B, GAO J S, et al. Study on zonal regulating string combining zonal isolation and production for heavy oil thermal recovery well[J]. China Petroleum Machinery, 2015, 43(6):96-98.
[5] 冯岸洲. 水驱稠油油藏化学法提高采收率技术研究[D]. 青岛:中国石油大学(华东),2012.FENG A Z. Researches on enhanced oil recovery chemical flooding in waterflooding heavy oil reservoirs[D]. Qingdao:China University of Petroleum(Huadong), 2012.
[6] 刘文章. 热采稠油油藏开发模式[M]. 北京:石油工业出版社, 1998:176-180.LIU W Z. The development models of heavy oil reservoirs by thermal recovery[M]. Beijing:Petroleum Industry Press, 1998:176-180.
[7] 姜婷婷, 杨秀娟, 闫相祯. 非均质油藏水平井分段注水优化软件的开发[J]. 石油机械, 2012, 40(7):70-75.JIANG T T, YANG X J, YAN X Z. Development of optimization software for staged water injection in horizontal well of heterogeneous reservoir[J]. China Petroleum Machinery, 2012, 40(7):70-75.
[8] WANG T R, ZHANG Y, LI L, et al. Experimental study on pressure-decreasing performance and mechanism of nanoparticles in low permeability reservoir[J]. Journal of Petroleum Science and Engineering, 2018, 166:693-703.
[9] LIU M, XIE R H, WU S T, et al. Permeability prediction from mercury injection capillary pressure curves by partial least squares regression method in tight sandstone reservoirs[J]. Journal of Petroleum Science and Engineering, 2018, 169:135-145.
[10] 路保平, 丁士东, 何龙, 等. 低渗透油气藏高效开发钻完井技术研究主要进展[J]. 石油钻探技术, 2019, 47(1):1-7.LU B P, DING S D, HE L, et al. Key achievement of drilling & completion technologies for the efficient development of low permeability oil and gas reservoirs[J]. Petroleum Drilling Techniques, 2019, 47(1):1-7.
[11] 徐国贤, 谢仁军, 吴怡, 等. 不同腐蚀缺陷套管剩余强度预测方法研究[J]. 石油机械, 2019,47(7):122-127.XU G X, XIE R J, WU Y, et al. Prediction method of residual strength of casing with different corrosion defects[J]. China Petroleum Machinery,2019,47(7):122-127.
[12] 付盼, 田中兰, 李军, 等. 页岩气水平井压裂地层滑移致套损模拟试验研究[J]. 石油机械, 2019,47(3):61-67.FU P, TIAN Z L, LI J, et al. Physical simulation experiment on casing damage caused by stratigraphic slip in shale gas horizontal well fracturing[J]. China Petroleum Machinery,2019,47(3):61-67.
[13] 李向阳, 孙伟, 张鹏飞, 等. 压实致邻近储层边界套管变形数值试验[J]. 石油机械, 2019,47(2):123-129, 135.LI X Y, SUN W, ZHANG P F, et al. Numerical experimental study on compaction-induced casing deformation adjacent to reservoir boundaries[J]. China Petroleum Machinery,2019,47(2):123-129, 135.
[14] 林元华,雷正义,施太和,等. 储层压实引起套管失效的机理研究[J]. 石油钻采工艺, 2004, 26(3):13-16.LIN Y H, LEI Z Y, SHI T H, et al. Study on mechanism of casing failure induced by the reservoir compaction[J]. Oil Drilling & Production Technology, 2004, 26(3):13-16.
[15] 李培超, 孔祥言, 卢德唐. 饱和多孔介质流固耦合渗流的数学模型[J]. 水动力学研究与进展(A辑), 2003, 18(4):419-426.LI P C, KONG X Y, LU D T. Mathematical modeling of flow in saturated porous media on account of fluid-structure coupling effect[J].Chinese Journal of Hydrodynamics, 2003, 18(4):419-426.
[16] API Standards Subcommittee on Tubular Goods. Specification for casing and tubing:API Spec 5CT[S]. Washington DC:API, 2005.
[17] 王同涛, 闫相祯, 杨秀娟, 等. 深井、超深井套管磨损后剩余强度分析[J]. 石油机械, 2009, 37(10):30-33.WANG T T, YAN X Z, YANG X J, et al. Study on tribological properties of textured sliding bearing unit of drill bit[J]. China Petroleum Machinery, 2009, 37(10):30-33.
[18] API Standards Subcommittee on Tubular Goods. Bulletin on performance properties of casing, tubing, and drill pipe:API Bull5c2[S]. 21st ed. Washington DC:API, 1999.

相似文献/References:

[1]高广启,罗文莉,孟庆鹏,等. 热采井不压井作业技术研究及应用[J].石油机械,2014,(12):87.
 [J].China Petroleum Machinery,2014,(01):87.

备注/Memo

收稿日期:2019-09-26。
基金项目:中石化科技攻关项目“胜利油田稠油油藏高速高效开发关键技术”(2016JT01)。
作者简介:王志坚,高级工程师,生于1968年,1992年毕业于成都地质学院地质工程专业,现从事采油工艺技术研究及采油工程管理工作。地址:(257000)山东省东营市。E-mail:wangzhijian196810@163.com。

更新日期/Last Update: 1900-01-01
亚洲彩票注册 优优彩票 六合在线 盛通彩票官网 诚立荣鼎信誉天下 乐盈彩票APP 盛通彩票app 六合在线 优优彩票官网 亚洲彩票app