[1]范玉光,田中兰,明瑞卿,等。国内外水平井井眼清洁监测技术现状及发展建议[J]。石油机械,2020,48(03):1-9。[doi:10。16082/j。cnki。issn。1001-4578。2020。03。001]
 Fan Yuguang,Tian Zhonglan,Ming Ruiqing,et al。Research on Horizontal Wellbore Cleaning Monitoring Technologies[J]。China Petroleum Machinery,2020,48(03):1-9。[doi:10。16082/j。cnki。issn。1001-4578。2020。03。001]
点击复制

国内外水平井井眼清洁监测技术现状及发展建议

参考文献/References:

[1] 张云驰,王俊姬,鞠少栋,等. 自旋转岩屑清洗工具模拟计算与分析[J]. 石油机械,2017,24(9):48-52. ZHANG Y C, WANG J J, JU S D, et al. Simulation and analysis of self-rotating cutting removing tool[J]. China Petroleum Machinery, 2017, 24(9):48-52.
[2] 宋洵成,管志川,陈绍维. 斜井岩屑运移临界环空流速力学模型[J]. 中国石油大学学报(自然科学版),2009,33(1):53-56. SONG X C, GUAN Z C, CHEN S W. Mechanism model of critical annular velocity for cuttings transportation in deviated well[J]. Journal of China University of Petroleum, 2009, 33(1):53-56.
[3] 李洪乾,刘希圣,汪海阁,等. 水平井各洗井区对钻井液流变参数的特殊要求及合理范围的确定[J]. 天然气工业,1994,14(4):40-43. LI H Q, LIU X S, WANG H G, et al. Special requirement and reasonable range determination for drilling fluid rheological parameters in all horizontal well[J]. Natural Gas Industry, 1994,14(4):40-43.
[4] OZBAAYOGLU M E. Effect of pipe rotation on hole cleaning for water-based drilling fluids in horizontal wells[R]. SPE 114965, 2008.
[5] 左建平,谢和平,周宏伟. 温度压力耦合作用下的岩石屈服破坏研究[J]. 岩石力学与工程学报,2005,24(16):2917-2920. ZUO J P, XIE H P, ZHOU H W. Study on failure behavior of rock under coupling effects of temperature and confining pressure[J]. Chinese Journal of Rock and Engineering, 2005, 24(16):2917-2920.
[6] 况雨春,张锐,罗金武,等. 水平井PDC钻头井下颗粒流数值模拟研究[J]. 石油机械,2019,47(7):36-42. KUANG Y C, ZHANG R, LUO J W, et al. Numerical simulation of downhole particle flow in horizontal well with PDC bit[J].China Petroleum Machinery, 2019, 47(7):36-42.
[7] 纪国栋,汪海阁,陈志学,等. 水平井岩屑清除工具设计及结构优化研究[J]. 石油机械,2016,44(7):31-35. JI G D, WANG H G, CHEN Z X, et al. Structure design and optimization study of cutting remover for horizontal well drilling[J]. China Petroleum Machinery, 2016, 44(7):31-35.
[8] 樊洪海. 实用钻井流体力学[M]. 北京:石油工业出版社,2014. FAN H H. Practical drilling fluid mechanics[J]. Beijing:Petroleum Industry Press, 2014.
[9] MICHALIS F. Uncertainty quantification for cuttings transport process monitoring while drilling by ensemble Kalman filtering[J]. Journal of Process Control, 2017, 53:46-56.
[10] ZHANG F F. Hole cleaning and ECD management for drilling ultra-long-reach laterals[R]. SPE 183785, 2017.
[11] GUILD G J. Hole cleaning program for extended reach wells[R]. SPE 29381, 1995.
[12] ONEY E. Improved ECD prediction and management in horizontal and extended reach wells with eccentric drillings[R]. SPE 178785, 2016.
[13] TERRY H, KRISHNA R. Improved prediction of ECD with drill pipe rotation[R]. SPE 15424, 2011.
[14] ANDAGOYA K I. ECD and downhole pressure monitoring while drilling at Ecuador operations[R]. SPE 177062, 2015.
[15] PAUL D. Real-time monitoring of downhole ECDs for parasite aeration using a simple spreadsheet calculation[R]. SPE 122205, 2009.
[16] SHEPPARD M C. Designing well paths to reduce drag and torque[R]. SPE 15463, 1986.
[17] PAYNE M L. Critical technologies for success in extended reach drilling[R]. SPE 28293, 1994.
[18] BRETT J F. Uses and limitations of drill string tension and torque models for monitoring hole conditions[R]. SPE 16664-PA, 1989.
[19] JONHANCSIK C A. Torque and drag in directional wells prediction and measurement[R]. AIDC/SPE 11380, 1984.
[20] GUILD G J, HILL T H. Hole cleaning program for extended reach wells[R]. SPE/IADC 29381, 1995.
[21] BART E V. The benefits of monitoring torque & drag in real time[R]. SPE 62784, 2000.
[22] NAEGEL M. Cuttings flow meters monitor hole cleaning in extended reach wells[R]. SPE 50677, 1998.
[23] 董红超,陈良. 科里奥利质量流量计原理及其应用[J]. 舰船防化,2008(4):44-47. DONG H C, CHEN L. Coriolis mass flow meter and its application[J]. Chemical Defence on Ship, 2008(4):44-47.
[24] MOJI K. Drill-cuttings analysis for real-time problem diagnosis and drilling performance optimization[R]. SPE 165919, 2013.
[25] SMITH B E. Measuring drilled cuttings and fluid recovery by real time mass balance[R]. SPE 189616, 2018.
[26] DUAN M Q, MISKA S. Transport of small cuttings in extended-reach drilling[J]. SPE Drilling & Completion, 2008, 23(3):258-265.
[27] GAVIGNET A, SOBEY J. Model aids cuttings transport prediction[J]. JPT, 1989,41(9):916-921.
[28] SHARMA M P. Cutting stransport in inclined boreholes[R]. OSEA 90159, 1990.
[29] DUAN M Q. Critical conditions for effective sand-sized-solids transport in horizontal and high-angel wells[J]. SPE Drilling & Completion, 2009, 24(2):229-238.
[30] 张晓东,吴臣德,张园,等. 气体钻井技术剖析及研究前景展望[J]. 石油机械,2008,36(6):75-78. ZHANG X D, WU C D, ZHANG Y, et al. The analysis and research prospects of gas drilling technology[J]. China Petroleum Machinery, 2008, 36(6):75-78.
[31] 肖新磊. 空气钻井技术在元坝地区的应用[J]. 石油钻探技术,2010,38(4):35-37. XIAO X L. Application of air drilling technique in Yuanba area[J]. Petroleum Drilling Techniques, 2010, 38(4):35- 37.
[32] LEONARD W C. Air drilling techniques[R]. SPE 6435, 1977.
[33] WILLIAM C. Air, gas and unstable foam drilling[M]. Burlington:Gulf Professional Publishing, 2009:183-212.
[34] ELLERBRUSH D A. Microwave methods for cryogenic liquid and slush instrumentation[J]. IEEE, 1970, 19(4):412-416.
[35] SAASEN A. Automatic measurement of drilling fluid and drill-cuttings properties[R]. SPE 112687, 2009.
[36] MIMS M G, KREPP A N, WILLIAMS H A. Drillingdesign and implementation for extended reach and complex wells[M]. Houston, Texas:K&M Technologies Group, LLC. USA, 1999.
[37] 李相方,隋秀香,刘举涛,等. 大位移井井眼清洁监测技术[J]. 石油钻采工艺,2001,23(5):1-3. LI X F,SUI X X, LIU J T, et al. Hole cleaning detecting method for extended reach wells by monitoring annulus pressure change[J]. Oil Drilling & Production Technology, 2001, 23(5):1-3.
[38] 李云波,李相方,姚约东,等. 基于PWD的大位移井井眼不清洁识别方法[J]. 石油钻采工艺,2007,29(1):1-3. LI Y B,LI X F, YAO Y D, et al. Early borehole uncleanness identification based on PWD tool in highly deviated extended-research wells[J]. Oil Drilling & Production Technology, 2007, 29(1):1-3.
[39] 梁海波,徐莎莎,赵万明,等. 煤层气欠平衡井的井眼清洁监测方法[J]. 天然气工业,2013,33(10):85-88. LIANG H B, XU S S, ZHAO W M, et al. Monitoring methods of borehole cleanliness for underbalanced horizontal CBM gas wells[J]. Natural Gas Industry, 2013, 33(10):85-88.
[40] 汪志明,翟羽佳,高清春. 大位移井井眼清洁监测技术在大港油田的应用[J]. 石油钻采工艺,2012,34(2):17-19. WANG Z M, ZHAI Y J, GAO Q C. Establishment of bore hole cleaning and monitoring technology and its application in Dagang Oilfield[J]. Oil Drilling & Production Technology, 2012, 34(2):17-19.
[41] 穆林,李相方. 大位移井井下不清洁的早期识别方法[J]. 天然气工业,2004,24(8):42-44. MU L, LI X F. Early identification method of downhole unclean circumstances in extended-reach well[J]. Natural Gas Industry, 2004, 24(8):42-44.
[42] 郭永峰,吴超,廖建芳. 水平井非线性摩擦扭矩的研究[J]. 天然气工业,1999,19(6):55-57. GUO Y F, WU C, LIAO J F. A study of nonlinear frictional torque in horizontal well drilling[J]. Natural Gas Industry, 1999, 19(6):55-57.
[43] 曾永文,王东生,张继军,等.水平井岩屑体积平衡计算方法研究与应用[J].录井工程,2019,30(1):13-16. ZENG Y W, WANG D S, ZHANG J J, et al. Calculation method of cuttings volume balance in horizontal well and its application[J]. Mud Logging Engineering, 2019, 30(1):13-16.
[44] 吕宪东. 基于岩屑测量传感器的测量方法:201110370241.1[P]. 2013-05-15. LÜ X D. A measurement method based on cuttings measurement sensor:201110370241.1[P].2013-05-15.
[45] 石怀荣. YC-1型自动岩屑采集机的开发与应用[J]. 石油机械,2001,29(4):34-35. SHI H R. Development and application of automatic cuttings gathering system[J].China Petroleum Machinery, 2001, 29(4):34-35.
[46] 段凤秋,张徐文. 基于DSP处理的科里奥利力质量流量计设计[J]. 石油机械,2005,33(3):28-30. DUAN F Q, ZHANG X W. Design of DSP based Coliolis force mass flow meter[J].China Petroleum Machinery, 2005, 33(3):28-30.
[47] 梁海波. 一种环空井眼清洁实时监测方法:201610265958.2[P]. 2016-09-21. LIANG H B. A annular hole cleaning real-time monitoring method:201610265958.2[P]. 2016-09-21.
[48] 汪海阁,刘希圣,丁岗. 水平井段岩屑床厚度模式的建立[J]. 石油大学学报(自然科学版),1993,17(3):25-32. WANG H G, LIU X S, DING G. The model of cuttings bed thickness in horizontal well section[J]. Journal of the University of Petroleum, China, 1993, 17(3):25-32.
[49] 汪志明,张政. 大位移水平井两层不稳定岩屑传输模型研究[J]. 水动力学研究与进展,2004,19(5):676-681. WANG Z M, ZHANG Z. A two-layer time-dependent model for cuttings transport in extended-reach horizontal wells[J]. Journal of Hydrodynamics, 2004, 19(5):676-681.
[50] 郭晓乐,汪志明,龙芝辉. 大位移井全井段岩屑动态运移规律[J]. 中国石油大学学报(自然科学版,2011,35(1):72-76. GUO X L, WANG Z M, LONG Z H. Transient cuttings transport laws through all sections of extended reach well[J]. Journal of China University of Petroleum, 2011, 35(1):72-76.
[51] 董长银,郑珊,李爱萍,等. 大斜度井筒条件下沉积砂床表面颗粒启动临界条件研究[J]. 石油钻探技术,2010,38(3):22-26. DONG C Y, ZHENG S, LI A P, et al. Research of critical condition for grains at bed surface in highly deviated wells[J]. Petroleum Drilling Techniques, 2010, 38(3):22-26.
[52] 周长虹,肖劲超. 气体钻井技术现状及发展趋势:2016年全国天然气学术年会[C]. 北京:中国石油学会,2016:1-5. ZHOU C H, XIAO J C. Air drilling technology status and development trend:natural gas academic annual conference[C]. Beijing:Chinese Petroleum Society, 2016:1-5.
[53] 马晓伟,窦金永,董玉辉,等. 气体钻井返出岩屑监测方法研究[J]. 西部探矿工程,2011(6):83-84,87. MA X W,DOU J Y, DONG Y H, et al. Research on monitoring method of gas drilling return cuttings[J]. Western Exploration Engineering, 2011(6):83-84,87.
[54] 闫自愿. 气体钻井岩屑返出监测系统设计[D]. 青岛:中国石油大学(华东),2016. YAN Z Y. Monitoring system design for return cuttings of gas drilling[J]. Qingdao:China University of Petroleum (Huadong), 2016.
[55] 夏文鹤,潘硕,孟英峰,等. 基于音频信号的气体钻井返出岩屑测量监测方法研究[J]. 石油钻探技术,2017,45(3):121-126. XIA W H,PAN S, MENG Y F, et al. The returned cuttings monitoring method for gas drilling based on audio signals[J]. Petroleum Drilling Techniques, 2017, 45(3):121-126.
[56] 易先忠,王利成,魏慧明,等. 钻井岩屑粒径分布规律的研究[J]. 石油机械,2007,35(12):1-4. YI X Z, WANG L C, WEI H M, et al. Study of the size distribution of drilling cuttings[J].China Petroleum Machinery, 2007, 35(12):1-4.

相似文献/References:

[1]杨海波,冯德杰.泥饼酸洗与筛管分段一体化工艺配套及应用[J].石油机械,2010,(04):16.
[2]张全胜,董社霞,田玉刚,等.DP35-1水平井留井管柱打捞工艺[J].石油机械,2010,(05):79.
[3]佘月明,佘梅卿,申秀丽,等.超浅层稠油水平井注采工艺的研究与应用[J].石油机械,2010,(06):56.
[4]黄辉才,刘玉国,李敢,等.水平井小直径套管堵水工艺技术[J].石油机械,2010,(07):70.
[5]刘明尧,许德宇,谭跃刚,等.水平井牵引机器人越障机构分析[J].石油机械,2010,(07):82.
[6]王治国,王在强,巨亚锋,等.K344-108型小直径封隔器的改进与应用[J].石油机械,2010,(08):40.
[7]徐克彬,马昌庆,邹余明,等.液压倒扣器在水平井、斜井修井中的应用[J].石油机械,2010,(09):56.
[8]荣莽,罗君.页岩气藏水平井分段压裂管柱技术探讨[J].石油机械,2010,(09):65.
[9]曾华军,李军,刘文剑,等.基于复合形法的水平井牵引器驱动臂设计[J].石油机械,2010,(11):33.
[10]吴建平.HSS-150水平井卡瓦式高压充填工具的研制[J].石油机械,2010,(11):54.

备注/Memo

收稿日期:2019-10-09。
基金项目:国家科技重大专项“长宁-威远页岩气开发示范工程”(2016ZX05062);中石油集团公司科技项目“深层与复杂地层钻完井新技术新方法研究”(2019A-3909);中石油集团公司重大现场试验项目“深层页岩气有效开采关键技术攻关与试验”(2019F-31)。
作者简介:范玉光,生于1994年,2017年毕业于东北石油大学石油工程专业,现为在读硕士研究生,研究方向为油气井工程。地址:(100083)北京市昌平区。电话:(010)80162276。E-mail:fygdr@cnpc.com.cn。

更新日期/Last Update: 1900-01-01
盛通彩票 亚洲彩票 盛通彩票登陆 六合在线 亚洲彩票注册 盛通彩票登陆 盛通彩票登陆 六合在线 优优彩票APP 优优彩票网