[1]张建兵,王洋洋,张晓梅,等.油套管螺纹关键参数的三坐标测量方法[J].石油机械,2020,48(04):135-141.[doi:10.16082/j.cnki.issn.1001-4578.2020.04.020]
 Zhang Jianbing,Wang Yangyang,Zhang Xiaomei,et al。Coordinate Measurement Method for Key Parameters of Tubing and Casing Thread[J]。China Petroleum Machinery,2020,48(04):135-141。[doi:10。16082/j。cnki。issn。1001-4578。2020。04。020]
点击复制

油套管螺纹关键参数的三坐标测量方法

参考文献/References:

[1] 朱加强,史交齐.API圆螺纹接头连接强度的影响因素研究[J].石油机械,2014,42(5):91-95. ZHU J Q,SHI J Q. Research on the factors influencing the connection strength of API knuckle thread joint[J]. China Petroleum Machinery,2014,42(5):91-95.
[2] 崔继强,徐和林,刘学强,等. 连接螺纹在塑性变形下的受力特性及参数优化[J]. 石油机械,2014,42(8):49-52. CUI J Q,XU H L,LIU X Q,et al. Stress characteristics and parameters optimization of coupling thread with plastic deformation[J]. China Petroleum Machinery,2014,42(8):49-52.
[3] 邵莉. 外螺纹中径三针法测量技术研究[J]. 计量与测试技术,2016,43(12):37-38,40. SHAO L. The external thread diameter three measured by technology research[J]. Metrology & Measurement Technique,2016,43(12):37-38,40.
[4] 沈志平. 关于三针法测量螺纹中径计算公式的探讨[J]. 机械制造与自动化,2010,40(3):59-62. SHEN Z P. Discussion on formulas of measuring pitch diameter of thread by measuring 3-pin[J]. Machine Building & Automation,2010,40(3):59-62.
[5] 张小梅,魏华,王韵龙,等. 圆锥螺纹三针法检测技术浅析[J]. 计测技术,2013,33(增刊2):12-14,23. ZHANG X M,WEI H,WANG Y L,et al. Analysis on the detection technology of conical thread three-needle method[J]. Metrology & Measurement Technology,2013,33(S2):12-14,23.
[6] 何燕侠,刘振宁. 浅析螺纹的几种测量方法[J]. 汽车实用技术,2016(4):127-128. HE Y X,LIU Z N. The comparison among several measuring methods of thread[J]. Automobile Applied Technology,2016(4):127-128.
[7] 王朋,马铁华,崔春生. 对螺纹中径直接测量仪的设计研究[J]. 电子器件,2017,40(4):1049-1052. WANG P,MA T H,CUI C S. The design and research of the measuring instrument for the diameter of thread[J]. Chinese Journal of Electron Devices,2017,40(4):1049-1052.
[8] GADELMAWLA E S. Computer vision algorithms for measurement and inspection of external screw threads[J].Measurement,2017,100(1):36-49.
[9] 张现东,卜昆,董一巍. 航空发动机叶片三坐标测量优化采样方法[J]. 航空动力学报,2019,34(1):168-176. ZHANG X D,BU K,DONG Y W. Optimal sampling strategy for aero-engine blade inspection with coordinate measuring machine[J]. Journal of Aerospace Power,2019,34(1):168-176.
[10] YOUNES E,ABDERRAZAK E O,AHMED C. Experimental investigation of dynamic errors in coordinate measuring machines for high speed measurement[J]. International Journal of Precision Engineering and Manufacturing,2018,19(8):1115-1124.
[11] 陈大伟,陈岳坪,杨翊,等. 复杂曲面的三坐标测量机采样参数选取[J]. 机械设计与制造,2018(1):209-211. CHEN D W,CHEN Y P,YANG Y,et al. Sampling parameter selection of CMM for complex surface[J]. Machinery Design & Manufacture,2018(1):209-211.
[12] 王庆广,马树元,吴平东, 等. 三坐标测量机测量外螺纹螺距和中径的方法[J]. 计量技术,2002(4):11-13. WANG Q G,MA S Y,WU P D,et al. Method for measuring external thread pitch and medium diameter by coordinate measuring machine[J]. Measurement Technique,2002(4):11-13.
[13] 刘浩,党养正,程锡铜,等. 三坐标测量机测量螺纹量规的一种方法[J].计测技术,2013,33(1):29-31. LIU H,DANG Y Z,CHENG X T,et al. Thread gauge measurement with CMM[J].Metrology & Measurement Technology,2013,33(1):29-31.
[14] 张欣,李凌梅,马艺清,等. 大尺寸圆柱螺纹量规中径测量方法[J]. 中国标准化,2017(14):47-48. ZHANG X,LI L M,MA Y Q,et al. Large-size cylindrical thread gauge medium diameter measuring method[J]. China Standardization,2017(14):47-48.
[15] 张波,曾燕华,张文建, 等. 大尺寸圆锥螺纹量规基面中径测量方法[J]. 上海计量测试,2017,44(1):10-14. ZHANG B,ZENG Y H,ZHANG W J,et al. Measuring method for base level middiameters of large size conical thread gauges[J]. Shanghai Measurement and Testing,2017,44(1):10-14.
[16] 刘兴富. 非最佳量针测量螺纹的定义中径[J]. 汽车零部件,2013(10):103-106. LIU X F. Analysis of non optimal amount of needle measure out defined pitch diameter of thread[J]. Automobile Parts,2013(10):103-106.
[17] 冯娜. 基于三坐标测量技术在石油用螺纹量规校准中的应用[D]. 西安:西安石油大学,2010. FENG N. The application of coordinate measuring technology in the oil screw gauge calibration[D]. Xi’an:Xi’an Shiyou University,2010.
[18] 赵卿. 石油螺纹标准量具的三坐标测量机检测方法[D]. 天津:天津大学,2016. ZHAO Q. Standard measuring tool of petroleum thread gauge using coordinate measuring machine[D]. Tianjin:Tianjin University,2016.
[19] 陈欣,曲绍波,刘芳,等. 数值分析[M]. 北京:电子工业出版社,2018. CHEN X,QU S B,LIU F,et al. Numerical analysis[M]. Beijing:Publishing House of Electronics Industry,2018.

备注/Memo

收稿日期:2019-10-01。
基金项目:国家自然科学基金项目“膨胀管金属密封结构扩径变形过程的工作机理研究”(51974251)、“低膨胀高强度轻质ZrW2O8-Cf镁基复合材料制备及其性能调控机理研究”(51905426);中国石油科技创新基金项目“用于水平井套变治理的新型膨胀套管接头金属密封研究”(2019D-5007-0305);西安石油大学研究生创新与实践能力培养计划资助项目(YCS19213110)。
作者简介:张建兵,教授,生于1974年,2003年毕业于西南石油大学油气井工程专业,获博士学位,现从事油井管新技术与理论的研究工作。地址:(710065)陕西省西安市。E-mail:zhjb@xsyu.edu.cn。

更新日期/Last Update: 1900-01-01
亚洲彩票平台 亚洲彩票平台 盛通彩票 六合在线 六合在线 盛通彩票官网 六合在线 亚洲彩票 诚立荣鼎信誉天下 盛通彩票app